NEW 650TLX

Telescopic Crawler Crane

Introducing the new 650TLX Telescopic Crawler Crane from HSC offering superb breakdown and assembly for quick and diverse preparation

SCX1000HD-3

Lattice Boom Crawler Crane

HSC has developed a completely new crawler crane line-up that makes unique concepts a reality  

CRANES

HSC Cranes

The world standard in crawler cranes

FIND YOUR CRANES

HSC Cranes 650TLX

The 650TLX is equipped with a lightweight, rigid 4-section telescopic boom mounted on a proven crawler crane body. The result is unsurpassed operating ease and control suited to a broad range of worksites, while delivering the level of eco-friendly performance, transportability and safety that is essential for today. The enhanced telescopic crawler crane 650TLX is designed with sophisticated styling and unrivalled job flexibility.

 

  • 210kw Engine
  • 10m Boom length
  • 70.9T Weight
HSC Cranes 650TLX
  • Engine
  • Swing system
  • Carbody
  • Crawler sideframe

Model : ISUZU 6HK1

Type : 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement : 7.79 liters

Rated Output : 210 kW / 1,900 min-1 (285 ps / 1,900 rpm)

Fuel Tank Capacity : 400 liters

Consisted of hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.

Welded steel construction with crawler side frame extend retract cylinders.

Frame : Welded steel box construction, and can be retracted.

Shoe : Cast iron 760 mm width shoe each side.

Upper Roller : 2 pieces each side.

Lower Roller : 10 pieces each side. Forging heat treated steel with double flange type. 2 plane bearing with floating seal for lifetime lubrication.

HSC Cranes SCX550E

HSC has developed a completely new crawler crane line-up that makes these unique concepts a reality. Superb, powerful lifting performance. High-quality and refined design. High reliability with time-tested components. Low-maintenance with straightforward mechanisms. The SCX E-series offers performance with an air of sophistication and simplicity that works wonders on any site.

 

  • 140kw Engine
  • 52.7m Max. Boom length
  • 52.5T Weight
HSC Cranes SCX550E
  • Engine
  • Swing system
  • Carbody frame
  • Crawler sideframe
  • Winch

Model: ISUZU 6HK1

Type: 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement: 7,790 cc

Rated Output: 140 kW / 2,000 min-1 (190 ps / 2,000 rpm)

Fuel Tank Capacity: 285 liters

Constructed with a hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.

Welded steel construction.

Frame: Welded steel box construction and can be retracted for transportation.

Crawer Shoe: Link type 760 mm width shoe each side. Flat type 760 mm width shoe each side. (Option)

Upper Roller: 2 pieces double flange each side

Lower Roller: 10 pieces each side.

Rope Diameter:

  • Front: 22mm
  • Rear: 22mm

 

Rope Length:

  • Front: 185m
  • Rear: 130m

 

Winding Capacity:

  • Front: 320m
  • Rear: 320m

 

Line Pull (rated):

  • Front: 63kN
  • Rear: 63kN

 

HSC Cranes SCX550-3

HSC has developed a completely new crawler crane line-up that makes these unique concepts a reality. Superb, powerful lifting performance. High-quality and refined design. High reliability with time-tested components. Low-maintenance with straightforward mechanisms. The SCX E series offers performance with an air of sophistication and simplicity that works wonders on any site.

 

  • 140kw Engine
  • 49m Max. Boom length
  • 56.5T Weight
HSC Cranes SCX550-3
  • Engine
  • Swing system
  • Counter weight
  • Carbody frame
  • Crawler sideframe
  • Winch

Model: HINO J05E-UN

Type: 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement: 5.123 liters

Rated Output: 138 kW/2100 min-1 (188 ps / 2100 rpm)

Fuel Tank Capacity: 300 liters

Constructed with a hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.

The optional swing brake pedal enables operators to control swinging operation precisely

Total Weight: 18.6 ton

8.7 ton Base Weight: 1 pieces

6.4 ton Insert Weight: 1 piece

1.7 ton Top Weight (right): 1 piece

1.8 ton Top Weight (left): 1 piece

Welded steel construction.

Frame: Welded steel box construction

Crawler Shoe: Cast iron 760mm flat shoe each side.

Upper Roller: 2 pieces each side.

Lower Roller: 10 pieces each side.

Rope Diameter:

  • Front: 22mm
  • Rear: 22mm

 

Rope Length:

  • Front: 185m
  • Rear: 120m

 

Winding Capacity:

  • Front: 324m
  • Rear: 324m

 

Line Pull (rated):

  • Front: 63.7kN
  • Rear: 63.7kN

HSC Cranes SCX800E

HSC has developed a completely new crawler crane line-up that makes these unique concepts a reality. Superb, powerful lifting performance. High-quality and refined design. High reliability with time-tested components. Low-maintenance with straightforward mechanisms. The SCX E series offers performance with an air of sophistication and simplicity that works wonders on any site.

 

  • 140kw Engine
  • 54.5m Boom length
  • 72.5T Weight
HSC Cranes SCX800E
  • Engine
  • Swing system
  • Counter weight
  • Carbody frame
  • Crawler sideframe

Model: ISUZU 6HK1

Type: 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement: 7.79 liters

Rated Output: 140 kW / 2,000 min-1 (190 ps / 2,000 rpm)

Fuel Tank Capacity: 285 liters

Constructed with a hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.

Total Weight: 27.9 ton

8.5 ton Base Weight: 2 pieces

4.9 ton Insert Weight: 1 piece

6.0 ton Top Weight: 1 piece

Welded steel construction.

Frame: Welded steel box construction and can be retracted for transportation.

Crawler Shoe: 62 track shoes with triple grousers made of induction hardened rolled alloy 810 mm width.

Upper Roller: 2 pieces each side.

Lower Roller: 10 pieces each side.

HSC Cranes SCX800A-3

Leading the way to the future, for any type of work, on any worksite. The SCX800A-3 is one of the first models in the industry to meet EU Stage IV/U.S. Tier 4 Final exhaust gas emission regulations, in a quest to develop more eco-friendly operation and work efficiency. Clean performance heralds in a new era of eco-friendly design.

  • 201kw Engine
  • 54.5m Max. Boom length
  • 76T Weight
HSC Cranes SCX800A-3
  • Engine
  • Swing system
  • Counterweight
  • Carbody frame
  • Crawler side frame
  • Winch

Model: Cummins QSB6.7 (Stage / Tier 4 Final )

Type: 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement: 6.7 liters

Maximum Output: 201 kW / 2,000 min-1 (273 ps / 2,000 rpm)

Fuel Tank Capacity: 428 liters

Consists of 1 hydraulic motor with a reduction gear and multi-disc brakes and a swing bearing which has inner teeth. Optional swing brake pedal enables operator to control swing precisely

Upper Weight (Standard) 3.4m width
Total weight: 28.2 ton
9.5ton base weight: 1 piece
9.5 ton weight: 2 piece

Lower weight: Optional for Flat Shoe
Total weight: 4.0 ton
2.0 ton Lower Weight: 2 piece

Welded steel construction with crawler side frame extend-retract cylinders.

Link type (standard)

Frame: Welded steel box construction and can be retracted for transportation

Crawler Shoe: Link type 810mm width shoe each side. Flat type shoe optional

Upper roller: 2 pieces each side

Lower Roller: 12 pieces each side

Rope Diameter:

  • Front: 26mm
  • Rear: 26mm

Rope Length

  • Front: 175m
  • Rear: 150m

Winding Capacity

  • Front: 210m
  • Rear: 210m

Line Pull (Rated)

  • Front: 108kN
  • Rear: 108kN

HSC Cranes SCX800A-3

Leading the way to the future, for any type of work, on any worksite. The SCX800A-3 is one of the first models in the industry to meet EU Stage IV/U.S. Tier 4 Final exhaust gas emission regulations, in a quest to develop more eco-friendly operation and work efficiency. Clean performance heralds in a new era of eco-friendly design.

  • 201kw Engine
  • 54.5m Max. Boom length
  • 76T Weight
HSC Cranes SCX800A-3
  • Engine
  • Swing system
  • Counterweight
  • Carbody frame
  • Crawler side frame
  • Winch

Model: Cummins QSB6.7 (Stage / Tier 4 Final )

Type: 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement: 6.7 liters

Maximum Output: 201 kW / 2,000 min-1 (273 ps / 2,000 rpm)

Fuel Tank Capacity: 428 liters

Consists of 1 hydraulic motor with a reduction gear and multi-disc brakes and a swing bearing which has inner teeth. Optional swing brake pedal enables operator to control swing precisely

Upper Weight (Standard) 3.4m width
Total weight: 28.2 ton
9.5ton base weight: 1 piece
9.5 ton weight: 2 piece

Lower weight: Optional for Flat Shoe
Total weight: 4.0 ton
2.0 ton Lower Weight: 2 piece

Welded steel construction with crawler side frame extend-retract cylinders.

Link type (standard)

Frame: Welded steel box construction and can be retracted for transportation

Crawler Shoe: Link type 810mm width shoe each side. Flat type shoe optional

Upper roller: 2 pieces each side

Lower Roller: 12 pieces each side

Rope Diameter:

  • Front: 26mm
  • Rear: 26mm

Rope Length

  • Front: 175m
  • Rear: 150m

Winding Capacity

  • Front: 210m
  • Rear: 210m

Line Pull (Rated)

  • Front: 108kN
  • Rear: 108kN

HSC Cranes SCX550-3

HSC has developed a completely new crawler crane line-up that makes these unique concepts a reality. Superb, powerful lifting performance. High-quality and refined design. High reliability with time-tested components. Low-maintenance with straightforward mechanisms. The SCX E series offers performance with an air of sophistication and simplicity that works wonders on any site.

 

  • 140kw Engine
  • 49m Max. Boom length
  • 56.5T Weight
HSC Cranes SCX550-3
  • Engine
  • Swing system
  • Counter weight
  • Carbody frame
  • Crawler sideframe
  • Winch

Model: HINO J05E-UN

Type: 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement: 5.123 liters

Rated Output: 138 kW/2100 min-1 (188 ps / 2100 rpm)

Fuel Tank Capacity: 300 liters

Constructed with a hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.

The optional swing brake pedal enables operators to control swinging operation precisely

Total Weight: 18.6 ton

8.7 ton Base Weight: 1 pieces

6.4 ton Insert Weight: 1 piece

1.7 ton Top Weight (right): 1 piece

1.8 ton Top Weight (left): 1 piece

Welded steel construction.

Frame: Welded steel box construction

Crawler Shoe: Cast iron 760mm flat shoe each side.

Upper Roller: 2 pieces each side.

Lower Roller: 10 pieces each side.

Rope Diameter:

  • Front: 22mm
  • Rear: 22mm

 

Rope Length:

  • Front: 185m
  • Rear: 120m

 

Winding Capacity:

  • Front: 324m
  • Rear: 324m

 

Line Pull (rated):

  • Front: 63.7kN
  • Rear: 63.7kN

HSC Cranes SCX800E

HSC has developed a completely new crawler crane line-up that makes these unique concepts a reality. Superb, powerful lifting performance. High-quality and refined design. High reliability with time-tested components. Low-maintenance with straightforward mechanisms. The SCX E series offers performance with an air of sophistication and simplicity that works wonders on any site.

 

  • 140kw Engine
  • 54.5m Boom length
  • 72.5T Weight
HSC Cranes SCX800E
  • Engine
  • Swing system
  • Counter weight
  • Carbody frame
  • Crawler sideframe

Model: ISUZU 6HK1

Type: 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement: 7.79 liters

Rated Output: 140 kW / 2,000 min-1 (190 ps / 2,000 rpm)

Fuel Tank Capacity: 285 liters

Constructed with a hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.

Total Weight: 27.9 ton

8.5 ton Base Weight: 2 pieces

4.9 ton Insert Weight: 1 piece

6.0 ton Top Weight: 1 piece

Welded steel construction.

Frame: Welded steel box construction and can be retracted for transportation.

Crawler Shoe: 62 track shoes with triple grousers made of induction hardened rolled alloy 810 mm width.

Upper Roller: 2 pieces each side.

Lower Roller: 10 pieces each side.

HSC Cranes SCX550E

HSC has developed a completely new crawler crane line-up that makes these unique concepts a reality. Superb, powerful lifting performance. High-quality and refined design. High reliability with time-tested components. Low-maintenance with straightforward mechanisms. The SCX E-series offers performance with an air of sophistication and simplicity that works wonders on any site.

 

  • 140kw Engine
  • 52.7m Max. Boom length
  • 52.5T Weight
HSC Cranes SCX550E
  • Engine
  • Swing system
  • Carbody frame
  • Crawler sideframe
  • Winch

Model: ISUZU 6HK1

Type: 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement: 7,790 cc

Rated Output: 140 kW / 2,000 min-1 (190 ps / 2,000 rpm)

Fuel Tank Capacity: 285 liters

Constructed with a hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.

Welded steel construction.

Frame: Welded steel box construction and can be retracted for transportation.

Crawer Shoe: Link type 760 mm width shoe each side. Flat type 760 mm width shoe each side. (Option)

Upper Roller: 2 pieces double flange each side

Lower Roller: 10 pieces each side.

Rope Diameter:

  • Front: 22mm
  • Rear: 22mm

 

Rope Length:

  • Front: 185m
  • Rear: 130m

 

Winding Capacity:

  • Front: 320m
  • Rear: 320m

 

Line Pull (rated):

  • Front: 63kN
  • Rear: 63kN

 

HSC Cranes 650TLX

The 650TLX is equipped with a lightweight, rigid 4-section telescopic boom mounted on a proven crawler crane body. The result is unsurpassed operating ease and control suited to a broad range of worksites, while delivering the level of eco-friendly performance, transportability and safety that is essential for today. The enhanced telescopic crawler crane 650TLX is designed with sophisticated styling and unrivalled job flexibility.

 

  • 210kw Engine
  • 10m Boom length
  • 70.9T Weight
HSC Cranes 650TLX
  • Engine
  • Swing system
  • Carbody
  • Crawler sideframe

Model : ISUZU 6HK1

Type : 4-cycle, Water-cooled, Direct injection, Turbo-charged, Diesel engine

Displacement : 7.79 liters

Rated Output : 210 kW / 1,900 min-1 (285 ps / 1,900 rpm)

Fuel Tank Capacity : 400 liters

Consisted of hydraulic motor with reduction gear and multi-disc brakes and a swing bearing which has inner tooth.

Welded steel construction with crawler side frame extend retract cylinders.

Frame : Welded steel box construction, and can be retracted.

Shoe : Cast iron 760 mm width shoe each side.

Upper Roller : 2 pieces each side.

Lower Roller : 10 pieces each side. Forging heat treated steel with double flange type. 2 plane bearing with floating seal for lifetime lubrication.

HSC Cranes in action

Worldwide Brands

We’re proud to offer a complete range of world leading brands, all backed up by our extensive parts and service divisions, anywhere in the country.

Hitachi produces the widest range of hydraulic excavators in the world, ranging from one-tonne minis to 800-tonne mining excavators. Every single model delivers a smooth and productive performance, and is comfortable, safe and reliable. In addition to excavators, Hitachi also produces wheel loaders, rigid dump trucks and other construction equipment for special applications.

Learn more

Bell Equipment is a global supplier with more than 19,000 machines operating in over 70 countries around the world. Launched in 1985, Bell Equipment's first Articulated Truck, the 25 tonne model was a resounding success, this led to new models expanding the range. Today the Bell Articulated Dump Truck range has again expanded, breaking new ground with the mining-focused 60 tonne capacity B60E.

Learn more

McCloskey International leads the screening and crushing industry with a complete line of equipment including: cone, jaw and impact crushers, vibrating screeners, trommels and stacking conveyors. The McCloskey line is used in a wide range of industries which include aggregates, landscaping, infrastructure and road building, construction and demolition, mining, waste management and recycling

Learn more

Continually the No. 1 selling truck in New Zealand. With a wide range of light, medium and large models available from 1.25 - 56 tonne payload. CablePrice Wellington have the right Isuzu truck to suit your business, no matter how big or small your operation is.

Learn more

Montabert offers a wide range of top performance products. A continuous investment in research and development has resulted in the delivery of technology products that revolutionize the construction and demolition industries. For almost 100 years, Montabert products have led these industries with three to five patents a year.

Learn more

HSC Cranes are supplied by Sumitomo Heavy Industries Construction Crane Co., Ltd. All HSC Cranes are designed under a three key concepts approach of “H” for High Quality, exceptional quality everywhere, “S for Satisfaction, continually and consistently meeting customer needs, “C” is for Confidence, further reinforcing a relationship of trust. HSC Cranes delivers true satisfaction.

Learn more

Isuzu industrial engines are world renowned for being environmentally friendly, reliable, quiet and efficient. From producing Japan’s first air-cooled diesel engine in 1936, Isuzu have considerably advanced their innovation and technologies to produce outstanding diesel engines. Today Isuzu offer a wide variety of engines with power outputs range from 11.8 to over 500hp.

Learn more
Powered to Succesd, your first choice

Use of cookies

This website stores cookies on your computer. These cookies are used to improve your website experience and provide more personalised services to you, both on this website and through other media. To find out more about the cookies we use, see our Privacy Policy. We won’t track your information when you visit our site.

Find your closest branch

Search by location
It appears you're using an old version of Internet Explorer for safer and optimum browsing experience please upgrade your browser.